alloy round tube
"
ASTM B163/B167 nahtloser Schläuche des Nickel-Legierungs-Rohr-N06600 der Legierungs-600
ASTM B163/B167 Nickel Alloy Tube N06600 Seamless Alloy600 tubing Inconel 625 tubes Common grades N02200, N04400, N06600, N06601, N06617, N06625, N06690, N08800, N08810, N08811, N08825, N08020, N08367, N08028, N06985, N06022, N10276, N10665 and so on. Common standards ASTM B163 ASME SB163) Seamless nickel and nickel alloy condenser and heat exchanger tube ASTM B165(ASME SB165) Seamless nickel - copper alloy seamless nominal pipe and tube ASTM B167(ASME SB167) Seamless ni - cr
Industrielle dünne Wand-Stahlschlauchlegierter Stahl-nahtlose Rohr-hohe Präzision
JIS SACM645 ISO 41CrAlMo74 BS 905M39 905M31 Alloy Steel tubes steel pipes for boring bar and machine spindle Additional technical requirements for steel grade 38H2MUA pipes Chemical composition, % С Мп Мо Р S Si Сг Аl SACM645 41CrAlMo74 BS905M39 0,35±0.01 0.30±0.02 0.15± 0.02 ≤ 0.025 ≤0.025 0.20± 0.02 1.35± 0.05 0.70± 0.1 Our tolerance ±0.05 ±0.1 ±0.05 Same Same ±0.1 ±0.2 ±0.2 Mechanical properties: steel yield (N/ mm²) tensile (N/ mm²) elongation % Hardness, HB max SACM645
Erdöl-Raffinierungs-legierter Stahl-nahtlose Rohre 6000mm - 12000mm Länge
GOST550-75 10Г2 15Х5М 15X5 10Mn2 25x2 20x2 25x2.5 Alloy Steel tubes steel pipes for Petroleum refining tubes Application:seamless steel tubes for petroleum refining tubes application Normal sizes:25x2.5mm 25x2mm 20x2mm Механические свойства 10Г2 15Х5М 15X5 марка стали Steel grade Времен. сопрот., Tensile Н/мм2 Предел текуч., Yield Н/мм2 Относит. удлин., Elongation % Относит. сужение, reduction % Ударная вязкость Impact KCU, Дж/см2 Твердость по Бринеллю, Hardness НВ, не более
Legierter Stahl-Rohr 40Cr/5140 ASTM A519 für Automobilteile
40Cr / 5140 Cold Rolled Tempering Alloy Steel Tube for Automotive Parts Material: 40Cr / 41Cr4 / 5140 Size Range: OD: 6-88mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Application: Mainly used for automotive parts such as gear, bushing and transmission shaft, etc. 100% Eddy Current Testing. 100% Size Tolerance Checking. 100% Tube surface checking to avoid surface defects. Product Name 40Cr / 41Cr4 / 5140 Temperaing Alloy Steel Tube Material 40Cr / 41Cr4 / 5140 Delivery
Legierter Stahl-Rohre SA423/A423M Electric Welded Low
SA423/A423M Grade 1 , Grade 2 , Grade 3 electric welded steel pipe , Electric-Welded Low-Alloy Steel Tubes Standard Specification for Seamless and Electric-Welded Low-Alloy Steel Tubes1 1. Scope 1.1 This specification2 covers minimum-wall-thickness, seamless and electric-resistance welded, low-alloy steel tubes for pressure containing parts such as economizers or other applications where corrosion resistance is important. 1.2 The tubing sizes and thicknesses usually furnished
Legierter Stahl-nahtlose Rohre JIS G 3462 für Wärmetauscher/Kessel STBA 12 STBA 13 STBA 20
JIS G 3462 STBA 12 STBA 13 STBA 20 STBA 22 STBA23 STBA 24 STBA 25 STBA 26 Alloy Steel Boiler and Heat Exchanger JIS G 3462 Alloy steel boiler and heat exchanger Standard:JIS G 3462 Wall thickness 0.5-50mm Diameter 5-420mmLength Upon request Application: for boiler and heat exchanger Produce method: STBA 12,STBA13,STBA20,,STBA 22 :electric resistant welding STBA 25 STBA 26 :Seamless Heat treatment: STBA 12,STBA13:Low temperature annealing, isothermal annealing, full annealing,
Dauerhafte legierter Stahl-nahtlose Rohre kaltbezogen/kaltgewalzte 1 - 15mm Gewichts-Größe
JIS SCM415 SCM430 SCM435 SCM440 Cr-Mo Steel Tube For Mechanical and rubber parts application Material:SCM415 SCM430 SCM435 SCM440 Size Range: OD: 6-114.3mm, WT: 1-15mm, Length: 5.8m/6m, maximal 11.8m Delivery Condition: CW, SR, A, N Application: For mechanical application Quality Control: 1. Incoming Raw Material Inspection 2. Raw Material Segregation to avoid steel grade mix-up 3. Heating and Hammering End for Cold Drawing 4. Cold Drawing or Cold Rolling, On line inspection
Gezeichnet über Dorn-legierter Stahl-Rohr Jisg3445 Stkm ringsum Form mit Od 3 - 420mm
JISG3445 STKM11A 12A 12B 12C 13A 13B 13C 15A Drawn Over Mandrel Steel Tube: JIS G3445 STKM 15A Drawn Over Mandrel Steel Tube Seamless And Electric Resistance, which is produced by mandrel and die on the ERW mother tube, with cold drawing and cold rolling processing to achieve final target dimension, with good OD and ID smoothness Product Name: Carbon steel tubes for machine structural purposes Japanese Product Name :つぎめがないこうかん Drawn Over Mandrel Steel Tube Material : STKM
1,7131 walzte nahtloses Rohr kalt
DIN16MnCr5 1.7131 EN10084 Gearing steel tube Alloy carburizing steel for bearing steel pipes as cold drawn and rolled Products Description: 16MnCr5|1.7131 properties is a chromium, manganese, titanium alloy steel specification. 16MnCr5|1.7131 is equivalent with others standard Carburizing steel, gearing steel. Related Specifications ASTM A29/A29M DIN EN 10083/3 JIS G4053 DIN DIN/T DIN17210 Heat treatment Related Annealing of 16MnCr5|1.7131 Alloy gearing steel Slowly heated to
